Hidden Hatch Latch System


Shown on a MIBO JETS A-10


The new "Hidden hatch latch system" provides a unique and totally hidden way for scale hatch latching.

Requires only the use of a ball driver or allen wrench to operate and can be installed anywhere there's a hatch. No bulky finger pulls for the latches, no slots to cut, only one small 5/32" diameter hole for the allen driver is needed in the exterior of the hatch. That's it!



Shown here installed in a MIBO JETS A-10 top center hatch. The hole was placed in the middle of a scale detail scribe and will be virtually invisible after the model has been painted.

Each unit comes with all necessary hardware shown in the photo at left. With enough brass cable for a 20" long hatch. Just provide the ball driver or allen key.