"Mini Watt" Sport Lighting Systems

Don't be fooled by the name. These 2 new systems pack a powerful punch when it comes to sport lighting. Each unit is designed to drive 1 watt "Luxeon" emitter style LED's with a lot of output lighting power. The "Mini" in the name refers only to their size!

Standard Mini Watt features:

Each standard units comes with a standard "Mini Watt" controller (.375 X 1.25"X 1.75" X .5oz)   Light outputs include: 2 landing lights, 1 (fixed rate) strobe and 2 wingtip lights (red/green). This is our "Bare Bones" system for the budget minded. It comes equipped for the basic airframe lighting needs; yet with a 3.5 amp output, is capable of supplying a lot of light for those on a budget. The landing lights can be turned on and off using a "Y" input signal from the retract channel. All wire harnesses are plug and play (no soldering) and come with enough wire for each light to allow the system to be used with anything up to most 1/5th scale aircraft. Longer wire runs are available at an additional cost. 

Mini Watt Plus:

The plus unit has several extra features making it a cut above the standard unit while still  maintaining a very attractive price.

Features include: Mini Watt Plus controller (.375 X 1.375 X 2.5 X .75oz) with on/off control (Rx channel or receiver switch), on/ off landing light control ("Y" to the retract channel for control), 2 landing lights, 2 fully adjustable strobes, 2 wingtip lights (red/green), 2 fixed lights (red or clear). Add the optional 2 fixed high output LED lights for cockpit lighting or any type lower level light outputs (red, green or clear). As with the standard unit, all wire harnesses are plug and play (no soldering). The Mini Watt Plus uses Molex style battery connectors and comes with a male battery lead plus a female lead for charging.

Mini Watt lighting system pricing is available on our online store electronics section